Use this as a starting point. For production decisions, validate against the supplier datasheet and your process targets.
Polyamide (PA6/PA66) for high-strength, wear-resistant, and glass-filled parts.
| Spec | Typical range / note |
|---|---|
| Grade types | PA6, PA66, GF 30% reinforced |
| Density | Varies by grade (request datasheet) |
| Common forms | Pellets / granules |
Need a PDF datasheet? We can provide it per grade during quotation.
Acrylic (PMMA) for clarity, weather resistance, and transparent mouldings.
| Spec | Typical range / note |
|---|---|
| Clarity | Excellent light transmission |
| Weather resistance | High (outdoor grades available) |
| Common forms | Pellets / granules |
Need a PDF datasheet? We can provide it per grade during quotation.
Polyacetal (POM) for precision gears, bearings, and wear-resistant parts.
| Spec | Typical range / note |
|---|---|
| Stiffness | High |
| Friction | Low (self-lubricating grades available) |
| Common forms | Pellets / granules |
Need a PDF datasheet? We can provide it per grade during quotation.
Polycarbonate (PC) for impact resistance and transparent engineering applications.
| Spec | Typical range / note |
|---|---|
| Impact strength | Very high |
| Transparency | Clear grades available |
| Common forms | Pellets / granules |
Need a PDF datasheet? We can provide it per grade during quotation.
Polypropylene (PP) for versatile injection, blow, pipe, film, and glass-filled parts.
| Spec | Typical range / note |
|---|---|
| Density | ~0.90 g/cm³ |
| Heat deflection | Grade dependent (request datasheet) |
| Common forms | Pellets / granules |
Need a PDF datasheet? We can provide it per grade during quotation.
Polyethylene (HDPE/LDPE/LLDPE) for films, moulding, extrusion, and packaging.
| Spec | Typical range / note |
|---|---|
| Density | 0.91–0.97 g/cm³ (grade dependent) |
| Melt Flow Index | Varies by grade and process (request datasheet) |
| Common forms | Pellets / granules |
Need a PDF datasheet? We can provide it per grade during quotation.
ABS for tough, glossy parts with reliable dimensional stability.
| Spec | Typical range / note |
|---|---|
| Impact strength | Grade dependent (request datasheet) |
| Finish | Good surface appearance |
| Common forms | Pellets / granules |
Need a PDF datasheet? We can provide it per grade during quotation.
SAN (AS) for clarity, chemical resistance, and dimensional stability.
| Spec | Typical range / note |
|---|---|
| Clarity | Good transparency |
| Chemical resistance | Good |
| Common forms | Pellets / granules |
Need a PDF datasheet? We can provide it per grade during quotation.
TPE/TPU elastomers for flexible, soft-touch, and impact-resistant parts.
| Spec | Typical range / note |
|---|---|
| Flexibility | Wide range (Shore hardness options) |
| Weather resistance | Grade dependent |
| Common forms | Pellets / granules |
Need a PDF datasheet? We can provide it per grade during quotation.
Specialty polymers sourced to your technical and compliance targets.
| Spec | Typical range / note |
|---|---|
| Grades | Availability-led (request options) |
| Documentation | Datasheet / COA on request |
| Common forms | Pellets / granules / compound |
Need a PDF datasheet? We can provide it per grade during quotation.
Share your target MFI/MFR, density, compliance constraints, and end-use. We’ll map requirements to available grades and lead times.